How To Make A Silencer
Repeat this procedure of marking the water bottle, only first make a mark two inches down from the two-inch mark at the top of the water bottle. Continue making marks until you have circled the water bottle. Measure two inches up from the bottom of the water bottle. Measure halfway up the soda bottle from the bottom.
First of all, I highly suggest you use sandpaper and lightly sand the external of the pvc pipe and the edges and sides. Firearm Noise Suppressors are legal in some states, but they require a serial number and a 200 tax for each of them. When it is shot and there is a hole at the end, then it turns into a suppressor which you need to have a tax stamp for before shooting. If you have a sight on the gun, youd be better off removing it, but you can cut a channel with an exacto knife for. All you need is your tax stamp. For simplicity, this one will use baffles only, but anyone could adapt it to screen or a combination.
Paused You're listening to a sample of the Audible audio edition.
Anyone with more than a laymans knowledge of guns would call them a firearm noise suppressor, but that is also somewhat misleading.
Then you can start reading Kindle books on your smartphone, tablet, or computer - no Kindle device required.
DO NOT tape THE suppressor TO THE GUN barrel!
The tube should be from 8 to 10 long.
This will allow some flexibility in the shape of the tube.
How to Make an easy homemade rifle silencer « Firearms
Note: make This item is eligible for click and collect. This is a little tricky, cause a badly placed baffle could be dangerous, and would destroy the silencer. It really changes the way it sounds.